Source:https://www.sintered-porous-filter.com/news/812.html Time:2020-06-12 Hits:86
Titanium Sintered Porous Filter Element Technical Data
Raw Material: Titanium
Filter Rating Range: 0.22 Micron ~ 100 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: ≤ 300 ℃
Outside Diameter: 12 mm, 25 mm, 30 mm, 50 mm, 60 mm, 65 mm, 70 mm, 80 mm, 90 mm, 100 mm
Length: 5'' (127 mm), 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector/Fitting/Adaptor:
1. DOE
2. Code 2 (226+Flat End)
3. Code 3 (222+Flat End)
4. Code 7 (226+Fin End)
5. Code 8 (222+Fin End)
6. Thread (NPT,BSP,G,M,R)
7. Flange
8. Special customization
Titanium Sintered Porous Filter Element Feature
1. Titanium sintered porous filter element is made from titanium powder particle
2. Titanium sintered porous filter element is sintered in a high temperature vacuum furnace
3. Titanium sintered porous filter element is depth filtration
4. Titanium sintered porous filter element is suitable for food industry and medicine industry (GMP) because titanium is an in-noxious metal and an inert metal
5. Titanium sintered porous filter element is backwash
6. High corrosion resistance
7. High porosity
8. High mechanical strength
9. High filter efficiency
10. High dirt holding capacity
11. High flow rate at low differential pressure
12. High temperature resistance
13. Washable and Cleanable
14. Reusable
15. Long service life
Application
1. Steam filtration (aseptic package, breweries, chemicals, dairies, electronics, food and beverage, pharmaceuticals, plastic)
2. High temperature gases filtration (highly aggressive gases, nitrogen, carbon dioxide, compressed air, tank ventilation)
3. High temperature liquid filtration (chemicals, cosmetics, paints, salt and seawater, syrups, coolants, food and beverage, pharmaceuticals, solvents, water)
4. Catalysts powders recovery
5. Precoat support filtration
ZWEN Quality Guarantee
1. We can provide raw material test report
2. We can provide filter efficiency test report
3. We will pay 2 times price for clients if SGS test report shows bad quality (we only accept SGS test report)
About Us
XINXIANG ZWEN FILTER CO.,LTD produces titanium sintered porous filter cartridge, titanium sintered porous filter element, titanium sintered porous filter disc, titanium sintered porous filter disk, titanium sintered porous filter pipe, titanium sintered porous filter plate, titanium sintered porous filter rod, titanium sintered porous filter sheet, and titanium sintered porous filter tube.
XINXIANG ZWEN FILTER CO.,LTD has advanced sintering equipment, advanced welding equipment and a high level of skilled workers.
XINXIANG ZWEN FILTER CO.,LTD has passed ISO 9001:2008 quality management system and SGS audit test.
XINXIANG ZWEN FILTER CO.,LTD main markets are European market and North American market.
XINXIANG ZWEN FILTER CO.,LTD Key Clients: Parker, GKN, SIEMENS, MAHLE.
Contact Us
XINXIANG ZWEN FILTER CO.,LTD
HEAD OFFICE: NO.728, 7TH FLOOR, JINGYE INTERNATIONAL, NORTHEAST CORNER, INTERSECTION OF JINSUI AVENUE AND XINER STREET, HONGQI DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA
FACTORY ADDRESS: NO.425, XINHUI ROAD, MUYE DISTRICT, XINXIANG CITY, HENAN PROVINCE,
TEL: +86-373-5807218
FAX: +86-373-5895995
EMAIL: info@zwenfilter.com
WEBSITE: www.zwenfilter.com
WEBSITE: www.leerfilter.com
WEBSITE: www.ti-frit.com
WEBSITE: www.ti-filter.com
WEBSITE: www.titanium-frit.com
WEBSITE: www.titanium-filter.com
WEBSITE: www.metal-sintered-filter.com
WEBSITE: www.sintered-porous-filter.com